How do I change the keypad code on my LDCO800?
Viewed 7688 times since Tue, Apr 5, 2011
If you know the current keypad code, simply press and release the "LEARN" button located in the center of the back of the motor unit in your garage. The red LED above the "LEARN" button will come on bright for 15 seconds. While the LED is on, enter... Read More
How do I program my MegaCode series keypad into my LDCO800 garage door operator?
Viewed 5714 times since Tue, Apr 5, 2011
The Linear LDCO800 series garage door operators use the MegaCode series keypad, model MDTK, part number DNT00058. To program a MegaCode series keypad to the LDCO operator, simply press and release the "LEARN" button located in the center of the back... Read More
How do I set the travel limits on my LDCO800?
Viewed 4652 times since Tue, Apr 5, 2011
Adjusting the Open Limit Use the wall station or a remote control to move the door to the open limit position. On the back of the opener, press both the "UP" and "LEARN" buttons at the same time for three seconds. The green indicator and opener's... Read More
How do I find the serial number of my LDCO800 operator?
Viewed 1650 times since Thu, Jul 7, 2011
The serial number on the LDCO800 will be on the front panel (towards the door) of the operator, to the right of the light bulb. The serial number will start with 20……