Nortek Security and Control KB
Allstar MVP Articles RSS Feed
What remote will work with my Allister or Allstar garage door operator?
Viewed 15616 times since Tue, Mar 30, 2010
For the built in receiver for the Sprint 200/250 and the 310/510 series operators, you will need a model 9921T 318 MHz transmitter part number 190-108794 for the built in radio system. The 9921MT in 318 MHz part number 190-109393 is the keychain... Read More
How do I program my MVP keypad into my MVP operator?
Viewed 4003 times since Thu, Apr 15, 2010
The MVP keypad is used with the MVP receiver or MVP door operator, and acts only as a transmitter. To learn in a keypad code, press and release the programming button located behind the small hole in the center of your deluxe wall station momentarily... Read More
How do I adjust the force setting on my Allister/Allstar/MVP garage door operator?
Viewed 3596 times since Fri, Mar 26, 2010
On both sides of the mounting plate of the motor unit, you will find a large adjusting screw. The close force adjusting screw is on the left side and is marked "CLOSE." The open force adjusting screw is on the right side and is marked "OPEN." Turning... Read More
How do I set the travel limits on my Allister/Allstar/MVP operator?
Viewed 3312 times since Fri, Mar 26, 2010
Travel limits on all models of the Allister/Allstar line are set by moving the limit cams on the chain. The up limit cam is on the right side of the chain as you look towards the door from the operator head. The down limit cam is on the left side of... Read More
What safety beams (photo eyes) can I use with my Allstar MVP garage door operator?
Viewed 2156 times since Fri, Mar 26, 2010
The Allstar MVP operator uses the Safe Finish Photo Eye system, p/n 190-109775. Read More
How do I find the serial number of my Allstar MVP operator?
Viewed 1897 times since Thu, Jul 7, 2011
The serial number on the MVP will be on the UL sticker on the back panel (away from the door) of the operator. Read More