Nortek Security and Control KB

My vacuum won’t turn on.

Check to make sure the electrical outlet that the unit is plugged into is working properly.
Try pressing and holding the reset button on the front of the vacuum canister for seven seconds and then release it.

Check your circuit breaker to see if your circuit breaker has been tripped.

If your vacuum still won’t turn on, you may need to contact a local dealer. To find a dealer in your area, please visit our website at http://www.linearcorp.com/locator/.

If your need further assistance, please call us at 800-421-1587 or e-mail us at vacuum@linearcorp.com.

1 (1)
Article Rating (1 Votes)
Rate this article
Attached Files
There are no attachments for this article.
Comments
There are no comments for this article. Be the first to post a comment.
Name
Email
Security Code Security Code
Related Articles RSS Feed
Can I use the hose from any manufacturer?
Viewed 2446 times since Tue, May 25, 2010
Can I replace the cord on my wand?
Viewed 2609 times since Tue, Nov 9, 2010
Can I buy wheels for my power brush?
Viewed 2838 times since Tue, Nov 9, 2010
Can I use the bag from any manufacturer?
Viewed 2384 times since Tue, May 25, 2010
Can I buy a replacement switch for my hose?
Viewed 2487 times since Tue, Nov 9, 2010
My vacuum doesn’t have as much suction as it used to. What’s wrong?
Viewed 29161 times since Thu, Jul 7, 2011
Can I vacuum saw dust?
Viewed 4511 times since Tue, May 25, 2010
I get suction at my can, but not through inlets.
Viewed 2747 times since Fri, Mar 12, 2010
One inlet has good suction, but another one doesn’t.
Viewed 3032 times since Thu, Jul 7, 2011
Can I buy a belt for my CT14DX or my CT18DX?
Viewed 3003 times since Tue, Mar 9, 2010