Nortek Security and Control KB

Why doesn’t my modem work with Hub Manager® version 8?

The first thing to do is determine which version of modem you are working with and what Max controller you are installing it to.
If you are using a Hub Max 3 and installing a max 3 modem (M3M) the Hub Manager® 8 application will work fine.

However, if you are installing a Max 2 modem (SS-modem) it will only work on a Hub Max 2 controller and the version of modem needs to be defined if it is version 1 or version 2.

The easiest fix is to use Hub Manager® 7.4 as there are less known issues when connecting to a modem.

Max 3/MiniMax 3 Systems – Modem Communication Error.

Affected Product: p/n M3M – Max 3 Modem Module.


Errors may occur when attempting to communicate to a Max3 system using the Max3 Modem (M3M) for the first time. When trying to establish a connection, you get an error message stating that there is either no connection, or the number of retries has been exceeded and door 1 is not found. The error is found in the Max 3 Modem with a manufactured date code prior to 2308 (where 23 is the week number and 08 is the year). If you are currently using the Max 3 Modem and have not experienced the communication error, this problem does not apply.


An Engineering Change Order in mid May corrected the issue. For systems that exhibit the communication errors as described, call IEI’s technical support at 800.421.1587 for the resolution.

Products affected:


1 (2)
Article Rating (2 Votes)
Rate this article
Attached Files
There are no attachments for this article.
There are no comments for this article. Be the first to post a comment.
Security Code Security Code
Related Articles RSS Feed
How do I update Hub Manager® Pro?
Viewed 9941 times since Thu, Mar 11, 2010
How do I use a Dashboard?
Viewed 3336 times since Mon, Apr 19, 2010
I can no longer communicate with my ProxPad or Max3 using the USB to Serial Converter on a Single Gang Plate.
Viewed 4535 times since Thu, Jul 1, 2010
I am not getting access with my cards.
Viewed 5806 times since Mon, Mar 15, 2010
How do I use the Lantronix Device Installer to program a Seg?
Viewed 2539 times since Wed, Jan 20, 2016
I received a Corrupt ReposFolder.INI error message.
Viewed 4109 times since Wed, Apr 14, 2010
How do I setup system manager in Hub Manager® Pro?
Viewed 7467 times since Fri, Jul 8, 2011
What devices are compatible with Dashboard?
Viewed 3043 times since Thu, Apr 8, 2010
How do I identify what Com Ports are available on my computer?
Viewed 3538 times since Tue, Apr 6, 2010
Hub Manager®: com port is not working and the USB driver is installed
Viewed 5495 times since Mon, Apr 19, 2010